Keep Your Technical Gear Dry

A Guide to Nikwax TX.Direct

Riders know the importance of reliable motorcycle jackets and clothing. But staying dry isn’t just about comfort, it’s about safety and performance. Over time, even the best waterproof fabrics lose their protective coating. That’s where Nikwax TX.Direct and Tech Wash come in.

These products aren’t just for motorcycle gear, they’re designed for all technical fabrics, from waterproof trousers and jackets to outdoor gear, hiking equipment, and more. If it’s made to repel water and let you move freely, TX.Direct can help it perform at its best.

closeup of biker in the rain wearing black muramasa spada jacket with rain water on his jacket

Why Your Technical Gear Needs Nikwax

Every ride or outdoor adventure exposes your textile gear to dirt, water, and grime. Standard detergents can strip away the durable water repellent (DWR) coating, leaving fabrics wet, heavy, and less breathable.

Tech Wash gently cleans your gear without damaging waterproofing, while TX.Direct restores the water-repellent layer, keeping water beads rolling off. Used together, they extend the life of your motorcycle jacket, motorcycle trousers, and any other technical clothing.

Eco-Friendly, Rider-Approved

Plenty of waterproofing products out there use nasty chemicals like PFCs which are bad for the planet, bad for waterways, and not great for your skin either. Nikwax takes a different route. It’s:

  • Water-based
  • Non-toxic
  • PFC-free
  • Biodegradable

For riders who care about their kit and the world they ride through, that’s a win-win. You get gear that stays dry without dumping harmful stuff into the environment.

Why Standard Detergents Don’t Cut It

Chuck your jacket in the wash with normal detergent and you’re doing more harm than good. Household cleaners strip away waterproof coatings and clog the fabric, stopping it from breathing. In short, you’ve ruined your expensive kit in one spin cycle.

Nikwax, on the other hand, is designed for technical gear such as motorcycle clothing. It cleans without stripping, and it restores that all-important waterproofing while keeping the fabric breathable. That means your waterproof jacket stays waterproof, and your gear performs exactly as it should.

SHOP NIKWAX
back of the spada acqua shield waterproof jacket for motorbike rider, jacket for men with waterproof and breathability

How to Use Nikwax TX.Direct on Your Textile Gear

  • Clean first – Wash your motorcycle jacket or other technical gear with Nikwax Tech Wash. Avoid regular detergents.
  • Wash-in method – Place your gear alone in the machine, add TX.Direct, use a gentle cycle with warm water (30°C), then rinse thoroughly.
  • Spray-on method – Hang clean, damp gear, spray TX.Direct evenly, rub lightly if needed, then air dry.
  • Dry and maintain – Air dry completely. Repeat after heavy rain or long rides to keep your gear waterproof and breathable.

Why Spada Recommends Nikwax

We design our gear to take you through every season, every storm, and every mile. But gear is an investment, and like your bike, it needs looking after. Nikwax keeps your waterproof gear working as it should, keeping you dry, comfortable, and focused on the ride.

Whether it’s your motorcycle jacket, hiking trousers, or any other technical clothing, maintaining your waterproof fabrics with Nikwax TX.Direct and Tech Wash keeps you dry, safe, and comfortable. Regular care makes your gear last longer and ensures it performs when you need it most.